声誉积分: 1
1
Hello all, today i finished a repair on my iPhone 6+. I replaced the LCD Display with one I bought off of amazon. Recently I turned it on to ensure that it was functional and I have run into an issue. The screen brightens up, but shows nothing but black. How should I go about fixing this issue. Thank you in advance!
声誉积分: 160.3千
11
202
370
Probably a defective screen like others have said.
If you have already tried reseating the cables and confirm that the phone is detected via computer on iTunes then you most probably have a faulty screen.
It's screen light up backlight but no display right?
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 2
总计 78
Sounds like the display cable wasn't properly connected. Open it up and reseat the cables.
由 Steve 完成的
Either that or the replacement screen was malfunctioning to begin with. Or it has been damaged during installation. You have to be really gentle with these things & take your time. Comprehending exactly how these things work, tolerances can only be learnt by bitter experience. Study the breakdowns with laser focus. Good Luck ;)
由 Jason G 完成的