修复你的物品 社区 商店

Model A1502 / 2.6 GHz (Turbo Boost up to 3.1 GHz) or 2.8 GHz (Turbo Boost up to 3.3 GHz) dual-core Intel Core i7 processor with 4MB shared L3 cache.

494 个问题 查看全部

更多选项

Display does not turn on

My display was cracked but still worked. I followed these instructions: MacBook Pro 13" Retina Display Mid 2014 Display Assembly Replacement

to replace it and it was very simple, however the screen did not turn on. I double checked the connections and it still would not display. I thought maybe I just purchased a bad display. I reattached my old display and it will no longer turn on. Any ideas of what may have happened? I made sure to read all of the comments on each step and was very cautious to not damage the logic board or its components. I'm at a loss since I know the original display turned on without issue prior to the change.

Block Image

Block Image

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的

更多选项

Can you hear the fans spinning? if not make sure you connected the battery. I often forget to do that!

这个答案有帮助吗？

是 否
得分 0

7条评论:

The Mac turns of for sure. I hear the chime, I see the keyboard lights turn on and can hear the fans. I've even attempted an SMC reset and NVRAM reset in case the system had something to do with it. Thank you though.

由完成的

The display is fine. The backlight is not coming on. Shined a light through the apple and I can see the login screen. Anyone know how I possibly could have blown the fuse with the battery disconnected?

由完成的

Even though there was no image on the screen was there still a backlight on the old one? did the apple logo still light?

由完成的

Prior to changing the screen the backlight on the old display came on. After changing the backlight no longer comes on at all for either display. I see no visible damage to the connector. I just used my multimeter to test the fuse and there doesn't seem to be a problem with the fuse but I added a picture because one side does look a bit burnt. What else could be wrong?

由完成的

Did you ever spill anything on the laptop? or are the lines around it just dust?

由完成的

显示更多的2条评论

添加一条评论

更多选项

My guess you blew something in the backlight circuit when you changed the screen. Maybe you forgot to disconnect the battery. It will be savable, but you need to find someone who does motherboard repair.

这个答案有帮助吗？

是 否
得分 0

1条评论:

I definitely didn’t for get to disconnect the battery. I followed the Ifixit guide very carefully to prevent something shorting out. Do you think there could be something wrong with the new display that could have caused this? I’m a bit worried that if we fix the logic board the display will just fry what ever is causing this again.

由完成的

添加一条评论

添加你的答案

Gonzo Neko (KitiClub) 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 507