跳转到主内容

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 个问题 查看全部

blacklight,flickering on iPad mini

Hi i have an iPad mini and i was trying to fix the backlight issue . (I open the screen and i send light to it to see whats going on) . Firstly without make anything the only problem was the blacklight i mean that if you send light to screen with a flashlight you could make anything you want in your device .But now when the apple logo appear make something like flickering (it appear-disappear).and the problem with the blacklight is the same

Update (10/30/2017)

Block Image

the "flickering"problem appear when i change this component

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

1个答案

已选择的解决方案

Is this a picture of your device or just a picture you found on the web? Have you tested the individual components in the backlight circuit?

I would start by validating that L2200 is in good condition. Then check the diode to insure it is working properly, even if you replaced it. You may have damaged it with too much heat while soldering it. I wold also check the coil. If needed, you may need to replace all of those components plus the driver IC.

这个答案有帮助吗?

得分 2

2条评论:

i test all the components and they have a good value i think .so i have to replace the ic? (the picture is from internet)

完成的

If you're confident that the other components are fine, then you can consider replacing the PMIC (U8100). However, that's not an easy IC to replace unless you have some experience so I would exhaust other avenues first.

完成的

添加一条评论

添加你的答案

Κωστας Λαζαριδης 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 5

总计 1,190