About a month ago the screen on my Apple Watch fell off. I replaced the adhesive and put the screen back on. When I started the watch back up the screen was very dim. So much so that it was hard to tell that it was on even in a dark room. Adjusting the settings was no help. I took the screen back off to make sure all the connections were done correctly and they were. Yet the screen is still dim. Anyone know why?
声誉积分: 8.3千
5
10
24
Very possible that when the screen "fell off" it could have damage the cable or the pins, depending on the details of "fell off" (i.e. fell on the ground, hung off the watch, etc).
I would recommend inspecting the pins on both screen and unit, examine the cables for damage. If there isn't anything wrong with them I would consider replacing the screen.
Good Luck
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 6
过去 30 天： 11
总计 3,906
3条评论
Any updates on this?
由 Rafael 完成的
I found a tear on the cable. Haven’t found a replacement yet. I’ll post the results soon hopefully.
由 jconell27 完成的
Any new news on this? I have the same problem, face fell off, no battery issue.
由 M. Joseph 完成的