修复你的物品 社区 商店

iPhone 6s Plus 发布于2015年9月25日,有两个型号A1687、A1634，网络制式有GSM、WCDMA，存储容量有16GB、64GB、128GB可选，机身颜色有银色、金色、深空灰、玫瑰金。维修iPhone 6s Plus和前代产品相似，需要螺丝刀和撬棒等。

1041 个问题 查看全部

更多选项

What does this part function as on a 6s plus front facing camera?

https://imgur.com/a/YIEIV

Today while I was doing a 6s plus repair I broke this little square off of the front-facing camera. (Image above) I am curious what it functions as.

I assumed it was the proximity sensor so when the customer puts their phone to their ear it will no longer be a black screen.

This was my first time breaking that off after several repairs. I guess it was a tad stuck in there. Also, what are some methods you use to prevent this from happening?

Thanks.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Yes, that's the proximity sensor and it does stick in that plastic casing at times. When it looks like it's going to be stuck, I often try to pry the entire plastic housing up off the screen rather than try to pry the proximity sensor out of the plastic housing. Otherwise, work it out of the housing by prying all around instead of one spot or by not pulling it out by the cable itself.

这个答案有帮助吗？

是 否
得分 1

1条评论:

Thanks Greg. So the only issue the customer should have is his screen not going black when his ear is put to it?

I tested the microphone and it worked so I just decided to continue with the repair.

I think next time I'm having trouble I'll try and stick something in there and pry the plastic up like you said. Thanks

由完成的

添加一条评论
最有帮助的答案

更多选项

I always use a bit of heat when removing the camera flex components and the home button assemblies off of all iphone screen replacements.

Not alot...80 - 90 C for a 10 to 15 seconds softens the adhesive without damaging any of the components and never had any issues getting anything apart.

这个答案有帮助吗？

是 否
得分 2

1条评论:

I actually have never used heat for a screen repair. Home buttons are always super easy to get out so I've never worried about heating that up.

As far as the camera I could see using a bit of heat to help get the sensor out easier. I actually did that repair in a library so it was a bit out of the question... haha

由完成的

添加一条评论

添加你的答案

Ian Romprey 将永远感激不已
浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 1

总计 68