已解决： Screen Goes Blank When Home Button/Heat Shield Flex Is Plugged In - iPhone 6

Screen Goes Blank When Home Button/Heat Shield Flex Is Plugged In

Device I traded in with broken/cracked LCD showed no signs of life.

An lcd and battery change has got phone working however a strange issue I'm wondering if anyone has experienced before.

When I connect home button/heat shield flex to the board the screen goes black.

Presumed there was an issue with flex but is is the same once replaced and the same with other lcds.

Any tips be appreciated, I'm guessing pointing towards board FPC issue.

*UPDATE: Error disappears when home button is unplugged from shield.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

发帖于: 2017年9月6日

更多选项

You definitely need to inspect the Home button FPC on the logic board. It could be damaged and shorting out. But it could also be a defective Home Button that is shorting the circuit. If the FPC looks good and there are no issues with the surrounding components, then I would try to install a "regular" Home button (Touch ID will not work). If that solves the problem, it is either the button or the Mesa circuit (which drives TouchID functionality).

Ultimately, the logic board will have to be tested by a micro-solderer to understand the root cause. If it is the MESA circuit, that can be repaired to restore Touch ID.

这个答案有帮助吗？

是否

得分 2

3条评论:

Just tried a spare home button which sorted the issue. Thanks, a device without touch id will do for now

由 Niall 完成的 2017年9月6日

Even better cleaned the old home button connection and all is working fine. Thanks

由 Niall 完成的 2017年9月6日

Awesome! Congrats!

由 Minho 完成的 2017年9月6日

添加一条评论

iPhone 6

Screen Goes Blank When Home Button/Heat Shield Flex Is Plugged In

1个答案

添加你的答案