Most projectors have a sequence using the buttons to initiate a 'service mode' upon power up where resets can be made. My unit is flashing the red temp light at a 1 second interval. This resulted from overheating due to a dirty filter. There are 3 thermocouples in the unit but there is no apparent damage. It seems that the microprocessor needs to be reset now that everything is cleaned and the unit is cool.
声誉积分: 101.2千
8
173
358
Patrick Riley, Below is a link to the service manual. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
这个答案有帮助吗？
过去 24 小时： 2
过去 7 天： 5
过去 30 天： 11
总计 758
