跳转到主内容

2014年9月19日发布的iphone 6 Plus有着比iphone 6大的5.5英寸屏幕。

1456 个问题 查看全部

Screen only works when phone is open

Hello all. I recently replaced my screen on my 6 plus. Just a week ago it started going black and would take a few minutes for the screen to work again. Now it won't come on. The funny part is when I open the phone up the screen works and as soon as I snap it back into the frame the screen goes black again. What could this be?

回答此问题 我也有这个问题

这是一个好问题吗?

按维修分数 0

评论:

I also noticed the cable piece with the brass contacts that touches the metal cover on the digitizer when the corner is pressed against the metal piece the screen dies

添加一条评论

1个答案

最有帮助的答案

My first guess is that a cable on your new display is unreliable: As the cable flexes when you close up your iPhone, one or more conductors in the cable are losing their connection.

  • If evidence shows that there is an iffy conductor, I'd remove and reattach the display, in hope that it's simply a poorly seated connector.
  • To determine if it the simple case that the display is simply not displaying anything, I'd try using a USB cable and see if the device shows up in iTunes even with a non-functional display.
  • If the old working-but-cracked display is still available and viable, I would temporarily re-install it and see if the old screen's behavior is normal.

这个答案有帮助吗?

按维修分数 1

评论:

Looks like bad cable. Would it harm my phone if I keep using it. Should I leave it off until I get it replaced.

It could, it may end up blowing up a backlight filter causing display but no backlight (dim display) ending up in a micro soldering job needing to be done (backlight filter would need to be replaced).

I would replace the display assembly with a new one. I would not use the phone until a new assembly is installed.

添加一条评论

添加你的答案

Charles inman 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 48