声誉积分: 23
1
I recently changed the screen on 2 Motorola Moto X pure edition, Because it was cracked but after replacement the power button doesn't work anymore. I wonder if that could be a defect on the screen I bought. Or if I did something wrong. I followed a online guide changing everything. And Both screen bought from the same seller won't power on. It does light up when I charge just not able to tun it on. what do I have to do ?
声誉积分: 55
2
1
I had the same problem - my power and volume buttons stopped working after replacing the battery.
The 2nd screenshot shows a cable that could have come loose. Mine was glued down and taped, but had still come loose (probably while heating the phone up to take the back plate off).
I used long thin pliers to peal the clear tape, reseat the flex, and put the tape back on again. The phone works great now!
这个答案有帮助吗？
Same problem and same resolution, but with Moto Z Force Edition. Thanks!
声誉积分: 13
1
there is a small rubber cover on the upper left hand side of the back plate after you close the phone back up. If you remove the cover it exposes a ribbon cable and connector the you can push to connect back to the main board. There is another one near the bottom for the same purpose to connect the battery.
I found and reconnected the one near the bottom but I missed the connector in the top left. The phone exhibited similar behavior: screen lights up when plugged in but power button doesn't respond. Hopefully that is also your issue. Hope that helps.
这个答案有帮助吗？
I have same problem,after screen replacement, but i dont know where is this place. Where is 2 from 3 screen? Please help.
这个答案有帮助吗？
过去 24 小时： 1
过去 7 天： 8
过去 30 天： 34
总计 3,775
1条评论
Did you ever figure this out or solve it?
由 klepper 完成的