Not charging ( % drop while charging ) and not recognizing in PC

Question

Huawei P9 Plus

P9 Plus是华为P9旗舰智能手机的优质版本。功能包括与莱卡合作开发的一体式机箱和双后置摄像头设置，64 GB内部存储器，可通过microSD卡扩展至1TB。

19 个问题查看全部

akram.elhayani @akramelhayani

声誉积分: 35

2

发帖于: 2017年5月2日

更多选项

Not charging ( % drop while charging ) and not recognizing in PC

about after a month of using my P9+ the first thing started to happen is that over the time charging time with increasing and after a while it got even worth it would take about 12 hours to charge up the phone

so I have replaced the charger and the cable still not charging replaced it agin and still not charging and I bought it from abroad so the warranty is not valid her

did a factory reset and still not charging

and

I have just replaced the charging board and I thought that the problem was there but it is still not charging after all

I don't Know what to do

any help

please

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 2

添加一条评论

2个答案

已选择的解决方案

Ben @benjamen50

声誉积分: 159.7千

Mtwo Perform

11

191

368

发帖于: 2017年5月2日

更多选项

Have you been using cheap car chargers? That may have contributed to the charging circuit getting damaged.

It's most likely an on logic board issue with charging ic chip getting damaged, once that stops working charging stops working completely and additionally probably detecting on computer too.

这个答案有帮助吗？

是否

得分 3

2条评论:

no I have been using the original charger that came with the phone .

so is this IC On the main board can be replaced ?

由 akram.elhayani 完成的 2017年5月3日

It sure can be replaced but unfortunately it's near impossible to find someone that does it or has the part. The only way to get the part is to take it from another phone if it can't be found online. It requires someone that does micro soldering with a microscope and a soldering iron also a hot-air rework station.

Usually I would suggest you to take the phone back to Huawei for warranty replacement (contact them first via phone support before doing so) but since you have opened up the phone you have most likely voided the warranty sticker which is a white sticker on top of a screw (I've personally opened up my Huawei P9 without voiding warranty as the sticker is right on a screw for the battery connector cover on my one).

I mean the Huawei P9 / P9 plus was released on 29 April 2016 which means the device would of been in warranty still if you bought it on or after 4th of May 2016.

由 Ben 完成的 2017年5月3日

添加一条评论

no I have been using the original charger that came with the phone .

so is this IC On the main board can be replaced ? — akram.elhayani
It sure can be replaced but unfortunately it's near impossible to find someone that does it or has the part. The only way to get the part is to take it from another phone if it can't be found online. It requires someone that does micro soldering with a microscope and a soldering iron also a hot-air rework station.

Usually I would suggest you to take the phone back to Huawei for warranty replacement (contact them first via phone support before doing so) but since you have opened up the phone you have most likely voided the warranty sticker which is a white sticker on top of a screw (I've personally opened up my Huawei P9 without voiding warranty as the sticker is right on a screw for the battery connector cover on my one).

I mean the Huawei P9 / P9 plus was released on 29 April 2016 which means the device would of been in warranty still if you bought it on or after 4th of May 2016. — Ben

Comarade Lee @comaradelee 声誉积分: 1 · Answer 1 · 2018-03-21T06:15:23-07:00

Comarade Lee @comaradelee

声誉积分: 1

发帖于: 2018年3月21日

更多选项

hi ben, i have send you an email regarding this problem. kinly check and we could discuss there.

这个答案有帮助吗？

是否

得分 0

添加一条评论

Huawei P9 Plus

Not charging ( % drop while charging ) and not recognizing in PC

2个答案

添加你的答案