I replaced the housing of my iPhone 6, now my back camera isnt focusing anymore.
So I thought I broke the camera, I replaced the camera with a new one but it is still the same issue.
The images are blurred, can anyone help me with this?
声誉积分: 221.8千
15
295
808
I would check out the "lens" in the housing. It may be dirty or have a fingerprint on it. You will need to clean it with either a magic pen or some IPA and a clean q-tip.
这个答案有帮助吗？
It is a custom housing and I believe it doesnt have a lens in the housing.
Could that be the problem?
If there was no lens, then it wouldn't be blurry unless it was the camera itself that was the issue.
声誉积分: 21.3千
5
19
70
Hi,
Custom or non original housings tend to have a low quality plastic lens.
This would need removing and replaced with a glass lens.
Or there may be dirt on the lens itself.
这个答案有帮助吗？
Or a foil of protective nylon.
Or that also!
过去 24 小时： 0
过去 7 天： 2
过去 30 天： 4
总计 399
1条评论
I will open my phone tomorrow and let you guys know, thanks!
由 Zackito 完成的