iPhone 5s home button bracket screws - how to unscrew

Question

iPhone 5s

苹果 iPhone 5s 于2013年9月10日公布。该设备的维修与以前的型号相似，需要螺丝刀和撬棒。可使用GSM或CDMA / 16、32或64 GB。颜色有银色、金色和太空灰。

3530 个问题查看全部

HelpMe @spamcatcher

声誉积分: 1

发帖于: 2017年4月8日

更多选项

iPhone 5s home button bracket screws - how to unscrew

I can not get the iPhone 5s home button bracket off. I don't know if I'm using the wrong tool, 000 Phillips (purchased off ifixit), or it's just too tight.

The screws do not look like the traditional plus sign in a lot of the photos I've seen online.

Any ideas?

I'm also not sure how to upload photos on this so you all can see what I am dealing with.

Could the screws be stripped?

Here is a photo of what the screws look like.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

Oh wow. Try a larger Phillips and a rubber band between the screw driver and the screw. If rubber band doesn't work a small piece of electrical tape has worked for me in the past.

由 Jeremy Hopper 完成的 2017年4月8日

添加一条评论

2个答案

已选择的解决方案

iMedic @theimedic

声誉积分: 57.5千

iMedic Phone Repairs

18

77

212

发帖于: 2017年4月8日

更多选项

I never use my 000 Kooku driver. It's real nice too. Shiny metallic purple. Rubber gaskets on the handle. Rotating head works much smoother. But it doesn't work. I use my 00 Best driver. Works every time. Does fail from time to time. Bought four of em in my day. Apparently they just straight up don't make a 00 driver over at Kooku

这个答案有帮助吗？

是否

得分 1

添加一条评论

Oh wow. Try a larger Phillips and a rubber band between the screw driver and the screw. If rubber band doesn't work a small piece of electrical tape has worked for me in the past. — Jeremy Hopper

Jeremy Hopper @tehhopper 声誉积分: 133 iTech Leavenworth 2 · Answer 1 · 2017-04-08T14:02:36-07:00

Jeremy Hopper @tehhopper

声誉积分: 133

iTech Leavenworth

2

发帖于: 2017年4月8日

更多选项

Hi,

I have done a lot of this particular repair. The 000 Phillips usually does the trick, however, in some instances where my customer has had their screen previously replaced by another repair shop sometimes I run into issues where that repair shop put different screws in. I don't know if this is due to lack of screw management or if it is that repair shops personal choice.

If it were the right screw you wouldn't have any trouble with it being too tight as the screws are too short to screw in too far to avoid damage to the front of the display.

Unfortunately, without knowing for sure I would guess that the issue is that incorrect screws are in the device. You might have to try several sized screw bits and hope for one of them to work.

Good luck.

这个答案有帮助吗？

是否

得分 0

添加一条评论

iPhone 5s

iPhone 5s home button bracket screws - how to unscrew

Update (04/08/2017)

Update (04/08/2017)

2个答案

添加你的答案