声誉积分: 23
2
Charger connected when not show any screen, not reponse
I checked rails
PP3V0_S2R_TRISTAR : 0v
PP1V8_S2R_TRISTAR : 0v
PPVBUS_PROT : 4.4v
Ppvbus e75 usb conn : 4.4v
Help me please
Sorry I cannot speak english well
I checked VCC MAIN
VCC MAIN : ALL 5.2V, NOT SHORT
and PP3V0_S2R_TRISTAR , PP1V8_S2R_TRISTAR line
checked
but all capacitor not short, volatage is 0
upload several pictures,
check please
声誉积分: 221.4千
15
289
807
The TRISTAR voltages should not read 0V.
Those voltages are being driven by the PMIC (U8100). You will need to determine if the 0V, probably caused by a short somewhere along the line, is due to a faulty PMIC, faulty Tristar (U6000) or a bad capacitor along the line.
UPDATE (2017-03-07)
I saw your update on the measured voltages. It would appear that the LED Buck Converter is not doing its job. This is caused by either defective passive components, such as the coil and diode (these are easy to check), or it is a defective PMIC. Considering you have other voltage issues (i.e. Tristar), I would lean more towards the PMIC. However, given that the PMIC is much harder to replace, you could try changing Tristar first to see if that solves the problem.
I would also probe all of the output voltages on the PMIC to see if there are more problems.
这个答案有帮助吗？
Thank you for your kind reply. "What is mean I,E? I'll check it.
Hi,
Can you explain or give me more information about the LED Buck Converter? What is this?
声誉积分: 16.1千
39
92
13
Are those going into or coming out of the tristar? Test for vccmain, and short to ground on those pins. Also will it power up with a known good battery?
这个答案有帮助吗？
Thank you for your kind reply.
I'll check it.
过去 24 小时： 1
过去 7 天： 3
过去 30 天： 8
总计 3,696
3条评论
Add
WLED LX A,B : 5.2V (datasheet :20v)
PPLED OUT A,B : 5.2V (datasheet :20v)
PPLED OUT BACK REG : 5.2V(datasheet :20v)
Measured value is lower than the value of the Regulation
U8100 problem?
由 Chulsunpark 完成的
Replace the tristar. It is very chipped and probable damaged.
由 Gigabit87898 完成的
Check if the WLED and PPLED lines are shorted to vcc_main.
由 Gigabit87898 完成的