跳转到主内容

这款4.7英寸iPhone于2014年9月19日发布,是iPhone 6 Plus的缩小版。

4994 个问题 查看全部

Change tristar and trigis but cannot detect to computer

Hello i am have problem of iphone 6

That Iphone always restart and cannot be charge. After that i change, ic u2 or tristar and trigis. It can charge batterai now but, after i plug to the computer it cannot detect , itune cannot find .... can anybody help me...

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
1条评论

Check the mail voltage rails for shorts. (PP_VCC_MAIN, PP_BATT_VCC, etc.) does any part of the phone get hot?

完成的

添加一条评论

1个答案

已选择的解决方案

If your device is not recognized by iTunes but works well otherwise, then it is probably an issue with Tristar. You will need to remove it again, check all the pads and surrounding components and install a new one.

这个答案有帮助吗?

得分 2

1条评论:

Sorry for commenting on the old reply.

My ipad pro 12.94th gen is showing similar symptoms. It can be charged, but it is not detected by PC at all. (I tried replacing the dock flex cable by disassembling the ipad, but the symptoms didn't change. I used every means such as replacing usb cable/PC.)

Is this also likely to be a problem with USB ic like tristar? (in ipad pro, Probably the CD3217B12 chip is USB ic)

完成的

添加一条评论

添加你的答案

bennyw2w3 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 2

总计 194