修复你的物品 社区 商店

The 2008-2014 (fifth generation) Honda City was unveiled in Bangkok, Thailand in September 2008. In South Africa, the Honda City is called the Honda Ballade.

19 个问题 查看全部

更多选项

My brake lights won't go off, please help me.

I was at the mechanic village this morning to work on the wheels and check for loose arms as I would, but after the mechanic work was done and through, I took the car for a test drive only for me to find out where I parked that my brake lights were actually on, at first I thought it was just the reflection of light from the sun but on going near it and feeling for temperature, I felt that it was very hot. So, I tried to check for what could have made the lights come on in the first place but couldn't. I don't want just any body to go dipping hands into the system just anyhow. Please help me.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 1
2条评论

2012 Chrysler Town and Country brake lights staying on

由完成的

try pumping them a little when the cars of so they get stiff, then use your hand and pull the pedal out, this solved my issue with my older mercury tracer

由完成的

添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Palms and Oaks Realty Limited , look under your dash above the brake pedal, follow the pedal arm up and you will see a switch. Check that the button on switch is aligned with the arm and is being pushed into shut the brake lights off. Pull up on pedal and have some one watch to see if brake lights go out, if they do you may have to adjust he switch so button gets pushed correct amount to open connection. If all looks good and brake lights still on, the brake light switch could be faulty or a short in the brake circuits wiring, which will have to be traced and repaired. If you have a trailer light harness installed check/remove it as sometimes these can be problem. Link below will give you an idea of brake light switch location, adjustment,etc.. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

http://craluxlighting.com/lighting/honda...

这个答案有帮助吗？

是 否
得分 5

8条评论:

Thank you, was greatly helpful

由完成的

Palms and Oaks Realty Limited, Welcome, thanks for posting back.

由完成的

many, many thanks. saved my ass

由完成的

Thank you for your answer!! You made my day!! It totally worked, and it was an easy fix... Just followed the arm and lifted the peddle, like you explained.

By P. Ritacca

由完成的

Palms and Oaks Realty Limited great info. thanks to you mate. It took only 2 minutes to fix this.

由完成的

显示更多的3条评论

添加一条评论

更多选项

i don't have much work with cars, however, electronically the circuit likely has a short. a pinched connection, or a stuck switch.

check the circuit switches for continuity.

I have attached a VERY BASIC Light Circuit. If the switch is closed, it gets current, if it is open, it does not.

Use a multimeter to measure Voltage drop from the switch, (Whichever one is triggered by the brake pedal to signal you are breaking)

If the multimeter reads 0V, then no voltage is dropped, and you have a short Circuit in the switch

Outside of that, your load circuits may be failing as well. i do not have the Circuit diagram for your specific car model, so i am unable to give you more that the simplest overview. i apologize that i can not help more

Block Image

这个答案有帮助吗？

是 否
得分 1
添加一条评论

添加你的答案

Palms and Oaks Realty Limited 将永远感激不已
浏览统计数据:

过去 24 小时： 11

过去 7 天： 46

过去 30 天： 207

总计 99,918