跳转到主内容

苹果 iPhone 5s 于2013年9月10日公布。该设备的维修与以前的型号相似,需要螺丝刀和撬棒。可使用GSM或CDMA / 16、32或64 GB。颜色有银色、金色和太空灰。

3483 个问题 查看全部

Replaced front screen .

My cousin gave me her old iPhone 5s but the screen was broken and dangling by the connector cables BUT half of the screen was still visible and the full screen reacted when you touch it now I have bought a new screen replaced it transferred my camera ,homebutton, shield, etc. I watched a video and followed every step twice but my phone still will not power on I tried to charge it.. no vibration please help!!!

Update (01/26/2017)

Thank you guys for the answers but I tried again to charge it and it showed the dead screen so maybe the remaining charge just needed to drain before I could turn it on :) KEEP COMMENTING for others who may have this same problem

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个回答

已选择的解决方案

The 5S requires that you place all of the screws in the right place. They all have different lengths, sometimes only differing by 0.1mm. But if you put a long one in the wrong place, you can kill the logic board. Check out the guide to see if you possibly made this mistake.

The other common issue is when the battery is not disconnected prior to removing the screen. This usually affects the backlight circuit but it can cause other problems.

Go back through this guide and double check everything.

这个答案有帮助吗?

得分 1
添加一条评论

hi niannna

1st check the battery voltage minimum voltage is 3.6v if its not there change the battery or boot the your old battery and check.....

2nd check power flexi cable any damage

3rd connect to itunes its detecting or not in system

if its detecting pls let me know

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Niannna 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 59