Left ear cup not working on August EP650 when using cable.

Question

Over-Ear Headphone

Repair guides and support for full size headphones that encompass the entire ear, also known as circumaural headphones.

108 个问题查看全部

Marc Robertson @marcr

声誉积分: 1

发帖于: 2017年1月15日

更多选项

Left ear cup not working on August EP650 when using cable.

I have a pair of August EP650 and they are both wired and Bluetooth. Because of a slight quality increase and no battery life, I like to use a male to male cable but there is no audio coming from the left cup (where you connect the cable). Using Bluetooth, the audio works on both cups and I used multiple compatible cables but it still doesn't work. I took a picture of the port and Ivan see a red and a black wire and a gold bar that is more on one side.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

2条评论

I realized that when I bend the aux (not the cord, the part of the male to male that goes in the headphones) the audio works in both sides. Also when I don't put the aux in completely, audio works fine on both sides as well. Could the port be broken?

由 Marc Robertson 完成的 2017年1月15日

I have the opposite problem. On bluetooth, sound is only coming out of one ear but on direct connection, both ears are working fine. Strange?

由 Jaycee 完成的 2022年12月15日

添加一条评论

1个答案

已选择的解决方案

jayeff @jayeff

声誉积分: 450.1千

11

367

1.4千

发帖于: 2017年1月16日

更多选项

Hi,

The tip connector spring inside the headset socket has either lost tension or the socket has a dry joint or loose connection to the headphones.

If the problem in the socket itself it will have to be replaced as they are irreparable.

You can prove where the problem is by opening the headphones and plugging a stereo audio cable into the headphone socket end only. Then connect an Ohmmeter between the tip of the jack plug at the end of the cable and where the tip connection of the socket appears in the headphones and see if there is a reading on the meter or whether it comes and goes by moving the jack plug. You could also check, if the socket is mounted on a pcb whether it is loose and all its' connections are soldered properly.

Here is an image of the connections used in a conventional headphone jack plug.

这个答案有帮助吗？

是否

得分 1

添加一条评论

I realized that when I bend the aux (not the cord, the part of the male to male that goes in the headphones) the audio works in both sides. Also when I don't put the aux in completely, audio works fine on both sides as well. Could the port be broken? — Marc Robertson
I have the opposite problem. On bluetooth, sound is only coming out of one ear but on direct connection, both ears are working fine. Strange? — Jaycee

Over-Ear Headphone

Left ear cup not working on August EP650 when using cable.

1个答案

添加你的答案