2014年9月19日发布的iphone 6 Plus有着比iphone 6大的5.5英寸屏幕。

1336 个问题 查看全部

Touch not working after screen replacements

Hello, guys ive bought from you guys a couple of times. I've fixed family members phones multiple times. Here's the problem, I've mostly done screen replacements, I have pry tools a heat gun and everything I need to replace screens efficiently. What I don't get is that sometimes when I replace the home buttons the sensors stop working but the home button itself works. I go back to see where I messed up and when I look to see, I don't see any damaged cables or anything. Can you guys help me out to see where I might be going wrong.

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12

3个回答

已选择的解决方案

Hi Christian. The folks answering questions on this forum are not iFixit employees, just volunteers.

Regarding your question, Home Buttons are very delicate. The flex is very narrow and has multiple copper traces running through it. There are also some electronics components on it to handle some (or all ) of the Touch ID functions depending on the model. So you have to be very careful when you peel off the flex from the screen frame. You could also be damaging the FPC connector, either on the Home Button or on the Home Button Extension cable that runs beneath the backplate.

Obviously, it's hard for me or anyone else to know what you could be doing wrong. I can only give you some ideas about what I typically see or have lived through when I started out.

If you are going to do repairs on a semi regular basis or more, I would recommend a magnifying lamp for your hobby desk or some kind of head magnifier (I don't know if this one is any good). Everything is very small in an iDevice. You need lots of light and magnification to really understand what's going on.

Head Magnifier张图片

产品

Head Magnifier

$24.99

这个答案有帮助吗?

按维修分数 1
添加一条评论

if you replace the home button the sensor will not work because of the board i.d and the new home button will not compatible.

这个答案有帮助吗?

按维修分数 0
添加一条评论

Just try to replace it with the whole assmlbly lcd or remove the battery whn you install the new one the power it with the lightning cable in the way u plug it

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

Cristian Sanchez 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 67