跳转到主内容

苹果 iPhone 5s 于2013年9月10日公布。该设备的维修与以前的型号相似,需要螺丝刀和撬棒。可使用GSM或CDMA / 16、32或64 GB。颜色有银色、金色和太空灰。

3530 个问题 查看全部

Blue Screen when trying hard reset and general use

So my iPhone 5s got dropped by a friend the other day and its all of a sudden started blue screening for no reason in all sorts of occasions it doesn't happen when one thing it does just seems at random but it does it every time i try to do a hard reset by holding down the home an sleep button.

I've reset the phone an it still has the problem, is this a hardware issue does anyone know what it might be or what i might need to replace?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

The blue screen (BSOD) is usually caused by the screws holding the screen assembly bracket being replaced incorrectly. The screws are tiny and of different lengths, often by just a few tenths of a millimeter. If you put a longer one where it's not supposed to go, then you damage the delicate copper traces on the logic board.

In your case, it doesn't sound like the device has been opened or repaired. However, the "standoffs" that secure the screws to the logic board could have been jarred off the logic board and damaged it. There are also other causes to BSOD, such as a defective Tristar IC (U2), which can also be damaged after a hard impact.

You may find some ideas about software issues to verify but I suspect you will need to have this phone looked at by a repair shop that can do micro-soldering repairs.

这个答案有帮助吗?

得分 2

1条评论:

Thank you :)

完成的

添加一条评论

添加你的答案

cameronbrookes 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 4

过去 30 天: 5

总计 106