screen issue , wont show anything

Question

iPad Mini 4

iPad Mini 4 发布于2015年9月9日，有着类似 iPad Air 2 的性能和更小巧的身材。

176 个问题查看全部

briiangullentops @briiangull11104

声誉积分: 23

2

发帖于: 2016年11月25日

更多选项

screen issue , wont show anything

Hi everyone ,

let me explain the problem,

so i wanted to repair my iPad mini 4 the screen was broken.

so bought an screen and when i connected the screen the 'sleep' button didn't wanna work.

no problem i know that it's an issue with the soldering or somthing so i send the screen back.

ill get a new screen now the problem is when i power on the ipad , it shows a quick 2 sec apple logo then nothing to see on the screen.

noticed when i try to 'play' with the power and home button it show the start screen but again also for 2 sec.

im out of ideas so can any explain?

is it a bad screen again or did i broke something?

****UPDATE****

Nothing worked ,

A prof checked the ipad on motherboard damage and he noticed that some of the 'ic's ' burned.

so i guess i made some short circuit. ouch :(

Now the iPad works again but still the 'sleep button' not.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

4条评论

Hey briiangullentops,

Where did you buy the screen?

由 Stijn Helmonds 完成的 2016年11月25日

partservice.eu

they use oem (or atleast thats whats on the box

由 briiangullentops 完成的 2016年11月26日

It could be bad parts or maybe you accidently do somthing wrong during the repair.

由 Stijn Helmonds 完成的 2016年11月26日

i guess i did something wrong originial broken screen has the same issue now .

%#*@ , time for a board repair

由 briiangullentops 完成的 2016年11月26日

添加一条评论

2个答案

已选择的解决方案

Ben @benjamen50

声誉积分: 159.8千

Mtwo Perform

11

191

368

发帖于: 2016年11月26日

更多选项

Plug the iPad into iTunes and check if it is in DFU mode because it could be if the screen is on a black display but turned on.

这个答案有帮助吗？

是否

得分 3

添加一条评论

partservice.eu

they use oem (or atleast thats whats on the box — briiangullentops
It could be bad parts or maybe you accidently do somthing wrong during the repair. — Stijn Helmonds
i guess i did something wrong originial broken screen has the same issue now .

%#*@ , time for a board repair — briiangullentops

kmcrawford111 @kmcrawford111 声誉积分: 13 3 1 · Answer 1 · 2017-01-03T08:47:45-07:00

I had what may have been a similar issue after replacing the LCD. Have you tried the "erase all content and settings" option? On mine, the iPad would power up OK, but after powering it off, the next time during powering on the Apple logo would appear, but then the display stayed dark. I could tell that the power was actually on, because I could hear the sound that plays when a charger is connected or when pressing home+power to take a snapshot.

If I'd hold home+power for about 10 seconds, it would perform a "force reset" and power on and work normally, but once I shut down the cycle repeated itself. It was annoying, and I don't know what caused it, though I didn't transfer over the little flex cable with the magnetic sensors from the old display, so that might be related.

Anyway, I erased all content and settings, and this problem went away. I should mention, though, that I have not yet restored the backup I made before the LCD replacement.

iPad Mini 4

screen issue , wont show anything

2个答案

添加你的答案