更多选项

Touchscreen not work within a vertical line (Change LCD does the same)

Hello,

I have a iPhone 5C with a strange problem.

Touchscreen does not work from top to bottom in a vertical line, aligned with the U key on keyboard all that line does not response to touch.

Here the things i have try:

1. With 3 Different LCD from different brands - Does the same

2. Cleaning MB ports - Still same

3. Sonic bath - Still same

4. Telescope inspection, port and circuit looks clean and stable, no marks or bend pins.

Also in addition touchscreen works by itself typing and random click everywhere - This happen sometimes, with or without plate shield on LCD and screws on of off.

Can't find a resolution... Maybe a bad cap or or component?

Anyone experienced the same problem?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

发帖于: 2016年11月23日

更多选项

The pictures show an awful lot of residue on the logic board. Was this before or after the the ultrasonic cleaning? The board should be perfectly clean.

If you have tried multiple LCD's and inspected the connectors then I would focus on the backside of the logic board and look at the area surrounding the Touch IC's. The iPhone 5C is susceptible to micro-fractures due to the weaker plastic housing. These are really hard to see, you need to ramp the magnification to 30X.

这个答案有帮助吗？

是否

得分 1

1条评论:

Was after cleaning. It may be contact spray i don't renember.

30x is to much for my equipment, only have up to 20x.

Anyway i have returned the phone to customer, will cause more bad than good if you go mess with the MB.

It still work beside that vertical unresponsive line.

Thank you

由 Tiago 完成的 2016年11月23日

添加一条评论

iPhone 5c 维修

Touchscreen not work within a vertical line (Change LCD does the same)

1个答案

添加你的答案