跳转到主内容

苹果 iPhone 5s 于2013年9月10日公布。该设备的维修与以前的型号相似,需要螺丝刀和撬棒。可使用GSM或CDMA / 16、32或64 GB。颜色有银色、金色和太空灰。

3530 个问题 查看全部

Wifi signal very weak and no bluetooth

Hello to everyone!

I have an iphone 5s with a little waterdamage.

Allready gave it a bath in isopropanol vor a couple of hours. The logicboard seems to be in good condition. As i can see.

The signal is very crapy, i have to sit in front of the rooter to get a connection.

  • I have allready checke'd if there are any missing cap's.
  • And also changed the wifi chip with no luck.
  • Also tried a different backcover with different wifi antenna.
  • The white capacitator near the chip has also been replaced , nothing changed.
  • The blutooth isn't working eather, only a spinning wheel so no on or off switching possible.

It would be very nice if anybody had a tip for me.

Thanks mischa

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
1条评论

Any idea would bes helpfull. Nobody?

完成的

添加一条评论

1个答案

已选择的解决方案

It sounds like you are very comfortable doing micro-soldering repairs and BGA rework. The WLAN & BT are controlled by the same chip and you have already replaced it with a new one (or reball?). Did you check the voltage rails going to the chip? Perhaps the problem is coming from the PMIC?

Did you remove the shields prior to cleaning the board? Perhaps there is some corrosion happening underneath them.

这个答案有帮助吗?

得分 2

1条评论:

Hello, thanks a lot vor your awnser!

And sorry for my late reply.

Yes i removed all shields and done proper cleaning.

The L9_RF is giving me strange voltage.... I will check the voltage and PMIC, when i'll find some time. Right now i'm in christmas anger at work. I'll let you now when i checked that voltage thing.

Thanks anyway for now!!!

完成的

添加一条评论

添加你的答案

mischakuh 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 661