iPhone 6 plus screen went static snow then died

Question

iPhone 6 Plus

2014年9月19日发布的iphone 6 Plus有着比iphone 6大的5.5英寸屏幕。

1526 个问题查看全部

Axel Holene @holene

声誉积分: 25

1

发帖于: 2016年9月15日

更多选项

iPhone 6 plus screen went static snow then died

I have an iPhone 6 plus of which I changed screen to a generic one bought from eBay about a month ago. It has been working quite good, though the new screen has at times been somewhat unresponsive, and there has been something that resembles a finger print slightly left below the center of the screen. When I pushed the screen, it kinda looked a bit like how I guess Harry Potter felt when Voldemort touched his head in the end of the Goblet of Fire, though not as visible. I have no idea wether this weak mark is relevant to this problem or not.

Anyhow: today, completely out of the blue, I took my phone out of my pocket and the screen had gone completely mad. It worked like a charm two minutes previously, but now just static snow, like an old TV with no signal. No response to touch or power button or anything. This lasted for a couple of minutes, then the phone died. Has been dead since.

I've tried to disconnect then reconnect the screen, and I also tried to reconnect the old broken screen, but still no response. Any ideas to what I could do?

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 2

添加一条评论

2个答案

pg162025 @pg162025 声誉积分: 1 · Answer 1 · 2017-01-13T03:34:45-07:00

pg162025 @pg162025

声誉积分: 1

发帖于: 2017年1月13日

更多选项

Even my phone went into a purple static state and hasn't changed since. But my phone has no history of damage and was bought fresh out of the store, so it's probably a collective software defect.

这个答案有帮助吗？

是否

得分 0

添加一条评论

Stephen Elliott @mdrecovery 声誉积分: 1.8千 4 8 2 · Answer 2 · 2017-01-13T04:05:46-07:00

Stephen Elliott @mdrecovery

声誉积分: 1.8千

4

8

2

发帖于: 2017年1月13日

更多选项

Have you tried plugging it into the computer to see if iTunes recognizes it.

Sounds like a possibility is the replacement screen in some way damaged your backlight circuit. Sometimes these replacement screens pull too much voltage and damage one or more filters or go through the line and damage your diode or backlight ic itself.

Another possibility is your replacement screen had exposed metal (most likely exposed contacts) that made contact somewhere else and caused a short to ground, possibly bringing a rail down.

I'm also tired so might not be explaining this very clearly.

I would first check to see if the computer recognizes it with a good known cable. And see if the phone runs hotter than normal to touch. If the computer recognizes and/or it's hot to touch or overly warm you most likely have shorted your backlight line.

这个答案有帮助吗？

是否

得分 0

添加一条评论

iPhone 6 Plus

iPhone 6 plus screen went static snow then died

2个答案

添加你的答案