跳转到主内容

苹果 iPhone 5s 于2013年9月10日公布。该设备的维修与以前的型号相似,需要螺丝刀和撬棒。可使用GSM或CDMA / 16、32或64 GB。颜色有银色、金色和太空灰。

3530 个问题 查看全部

Red screen of death

Hello,

I have replaced the screen on an iPhone 5s. After replacement it couldn't boot up properly, I mean it stuck on the apple logo.

So I thought I could put it in DFU mode to restore it with iTunes. Once put in the DFU mode and connected to iTunes on a Mac, iTunes started to restore and downloaded the newest iOS. When it finished downloading it wrote "Waiting for iPhone". Ok thats normal.

But than accidentally on the phone appears a red screen. iTunes gives me an error 4013.

Thought it could be the front camera as I faced that problem in the past already with other iPhones, so I disconnected only the front camera, but still same error.

Thank you

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
1条评论

maybe lcd not orginal or have board problem

完成的

添加一条评论

3个答案

已选择的解决方案

Did you make sure the screws are not mixed up? Mixing up the screw can cause long screw damage to the board.

这个答案有帮助吗?

得分 4

10条评论:

Yes, I did. It isn't my first phone to repair. I don't know how this is possible. Maybe the screen is damaged.

完成的

Try the old screen then? Also try without the front camera cable connected.

完成的

The old screen is cracked. I already tried to start without front camera as mentioned in my question.

Thank you for your response

完成的

Just to see if it can boot with the old screen. If not then there is damage to the board.

完成的

As Tom said, the simple answer is to put the old screen on and see if it boots. Yes, we know that it is cracked. If it boots with the old screen, you know that its a parts issue. If not, then you know that you need to take the phone apart and examine the board for damage.

Experience says its probably a damaged board.

完成的

显示更多的5条评论

添加一条评论

Even a damaged front camera flex can cause red screen of death boot if you didn't know already.

这个答案有帮助吗?

得分 2
添加一条评论

According to Apple you would need to reinstall iTunes. And when Apple tells you to reinstall iTunes you know that's a dumba** response. Maybe it was caused by the hardware because the iPhone 6s also encountered the same problem and have to use the original touch id cable for it to work. Try put your original home button and front camera module in the new screen and see if it works

这个答案有帮助吗?

得分 0

1条评论:

It is the original. Shouldn't it work if I unplug them?

完成的

添加一条评论

添加你的答案

Alex 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 8,184