修复你的物品 社区 商店

这款4.7英寸iPhone于2014年9月19日发布，是iPhone 6 Plus的缩小版。

4994 个问题 查看全部

更多选项

How to close the iPhone 6 properly

When replacing an iPhone 6 screen i have the following thing that botters me.

The iPhone on which i replaced the screen has a little 'space on the upper left side (on the height of the volume buttons) when its dark you see a little light. also if i push a little harder the screen goes a tiny bit down.

Question: Does this have to do with the way i click the screen in the phone?

Instruction video A shows: you have to click from top to bottom

instructoin vido B shows: once you placed it on the top, first click the bottem in and them slowly click the screen in upwards....

any advice?

Thanks

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

The iPhone 6 Frames are very prone to bending and warping which prevents the screen from sitting correctly, I have had this issue with the screen being raised slightly above the volume buttons a couple of times and a new frame has always resolved the issue.

这个答案有帮助吗？

是 否
得分 2

1条评论:

Yes, after all this time I found this is the best solution. (Also bending the frame back, with the right equipment ofcourse, is a good solution to a slightly bent phone

由完成的

添加一条评论
最有帮助的答案

更多选项

Slide the top part in (so that the frame is under the outer frame of the phone), and then work your way down from there until the phone sits flush on all edges. Press hard and firm as it's not the easiest thing to get in there. Good luck bro!

这个答案有帮助吗？

是 否
得分 3
添加一条评论

添加你的答案

Alex 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 111