What board should I use for replacement?

Question

HTC One M8

第二代HTC One被称为HTC One（M8），它具有双闪存和新的Sense 6 UI，并于2014年3月25日发布。

202 个问题查看全部

Chris Campbell @doppelgangr2

声誉积分: 1

发帖于: 2016年5月24日

更多选项

What board should I use for replacement?

I currently have a Verizon HTC One M8 (HTC6525LVW). While trying to fix a gps issue (bend antenna to make better contact with case), I snapped off the little antenna for the gps.

It's located on the daughter board on the top of the phone, so I'm guessing that I need to replace the whole daughter board. When shopping around for boards do I have to go with the exact replacement for my Verizon model or are they interchangeable between carriers/models? I have found a few from China that don't offer a model number and only list compatibility as "HTC One M8". After replacement will this affect any of the firmware currently on the phone?

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

Evan Wilbur @rozencrantz 声誉积分: 1 · Answer 1 · 2016-10-04T23:22:11-07:00

Evan Wilbur @rozencrantz

声誉积分: 1

发帖于: 2016年10月4日

更多选项

Wow, this was old but I found this since I have a similar issue.

If you have the tools and the skill, you can solder a small wire where the antenna used to be. Make sure it's long enough to make contact with the case but short enough so not to get interference.

If that fails, replace the daughter board. They aren't horribly expense

这个答案有帮助吗？

是否

得分 0

添加一条评论

HTC One M8

What board should I use for replacement?

1个答案

添加你的答案