跳转到主内容

2.26 or 2.4 GHz / White plastic unibody enclosure

645 个问题 查看全部

Possible to get Serial from UUID?

My late 2009 white Unibody MacBook doesn´t show it´s serial #. In Profiler there is only ´not available´. The lower case was replaced because the rubber was peeling off, so the number there isn´t the correct, original one. There is no serial on the RAM socket also, the sticker there is just pure blank.

Is it possible to read the serial somewhere else, maybe from the UUID?

Update (05/11/2016)

is the blank, black sticker on the RAM socket a sure indication of a mainboard swap? Its a pity that there is no other location of a serial # anywhere on the board, its´s quite easy to dissemble for a lookup..I already looked under the battery.

I also tried ´´nvram -p´´ but nothing..

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
1条评论

If the About This Mac or the Profiler doesn't show it, it's not present. Sorry ;-{

完成的

添加一条评论

1个答案

已选择的解决方案

For reference: Mac 101: Finding your Mac's UUID.

Sadly the UUID is not the same value as your systems serial number it is generated using a few different methods depending on the systems age and firmware level. Here is a good write up on the spec: Wikipedia - UUID.

So it appears your systems logic board was swapped out at some point with a clean board. The tech forgot to burn the S/N or didn't have the needed tool (access) to burn it. Did you pop off the bottom cover at take a look on the other side? SOP was to make note of the new number if board was replaced.

这个答案有帮助吗?

得分 1
添加一条评论

添加你的答案

Jamba 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 3

总计 782