跳转到主内容

The HTC EVO is a Smartphone by HTC powered by a 1-GHz Snapdragon processor and runs the Android operating system.

71 个问题 查看全部

How the heck do I fix the power dongle?

First, thanks for the site - bought a Torx set and got the back of the Evo open. My problem has to do with where the power cord - either a wall adapter or car adapter - attaches to Evo. I don't even know what to call the little piece the adapter slides into. BUT. That particular piece has broken off on my Evo. I can see where it goes, and where the connection points have to meet - but it clearly requires solder to repair. Right now the little metal receptor that is normally IN the phone stays on the end of my power adapter and I use rubber bands and voodoo to keep the charging connection active.

Suggestions? Any way for me to re-secure that thing?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 2
1条评论

I noticed you never got an answer to this. Are you still having this problem?

完成的

添加一条评论

1个答案

已选择的解决方案

I imagine you are talking about the power connector, which can be seen in this photo:

http://guide-images.ifixit.net/igi/5WFTB...

... bottom right, immediately below the vibration motor.

It's a surface mount component. If the board where it connects, and the loose power socket, are both undamaged, it probably could be resoldered back on with a hot air gun and a lot of care, much like soldering in SM IC's. A soldering iron will not be able to do this, it will just mess everything up. If you don't have the tools to repair this, a good repair shop could do it for you.

err, here is an amateur showing how it's done.

http://www.youtube.com/watch?v=yhhLyxkTV...

这个答案有帮助吗?

得分 1
添加一条评论

添加你的答案

Rena 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 3,405