已解决： Is there a simple fix to make my usb ports work again? - MacBook Unibody Model A1342

Is there a simple fix to make my usb ports work again?

Neither of my two USB ports recognise anything I plug into them.

I have tries a pRAM reset and a SMC reset to no avail.

From time to time an internal warning sign pops up telling me to unplug USB (although nothing is physically connected) due to overloading. (I think the exact wording is "unplug device using too much power to enable USB")

I have had a look inside and I can see no damage, but I am a layman.

Can YOU see anything strange?

Is there anything I could tweak to get them working again?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 -1

发帖于: 2016年2月27日

更多选项

Sorry no easy fix here ;-{

If you had no power to the USB ports then I could see a burnt fuse issue. But, in this case your USB controller logic is damaged. This will require some deep skills to diagnose what on the logic board is damaged.

Do you remember what happened here? I suspect you plugged in a device which is powered that blew your logic board. Do double check what you plugged in as it could damage your system again or some other system here.

这个答案有帮助吗？

是否

得分 2

2条评论:

I have decided to replace the logic board with a 2nd hand one. However, there seem to be two reference numbers for the same model computer.

Is there likely to be much difference? How do I find the reference number of my original? Any comments gratefully received. Thanks.

由 Simon G 完成的 2016年2月28日

There are two different versions of the same logic board based on the CPU's clock speed 2.26 GHz or 2.4 GHz. You might want to get the faster one, otherwise they are the same.

由 Dan 完成的 2016年2月28日

添加一条评论

MacBook Unibody A1342

Is there a simple fix to make my usb ports work again?

1个答案

添加你的答案