Black bits on the connector pulled off during Digitizer replacement

Question

iPad 3 4G

Third generation of iPad, featuring 4G capabilities, released on March 16, 2012. Model number A1430. Repairs require heat and careful prying.

106 个问题查看全部

J Lefo @juux

声誉积分: 9

1

发帖于: 2016年2月18日

更多选项

Black bits on the connector pulled off during Digitizer replacement

Hi all,

I'm trying to replace the touch screen on my iPad3 after I broke it.

When trying to remove the tape that was between the connector and the digitzer ribbon, the black bit on top of the connector came out with the ribbon...

See pictures here:

Picture 1

Picture 2

My question is: is this black bit important or can I replace it with something else or do I need to change the connector?

Thanks for your help

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 -1

添加一条评论

1个答案

已选择的解决方案

Mimi @imimimobile

声誉积分: 2.3千

7

5

1

发帖于: 2016年2月18日

更多选项

Hi J

You can try to put it on the top and seal it with something and see if it is going to work. If not you can replace the connector or just try to repair it. But this need to be there to make the connection.

Hope this help

这个答案有帮助吗？

是否

得分 1

8条评论:

Hi Mimi,

Thanks for your answer. You mean put some black tape on top of the connector to replace the missing part?

由 J Lefo 完成的 2016年2月18日

If you still have the part you need to try to put it in place like that the connections will merge. If you don't have the broken part just tape won't fix the problem you need to replace the connector or find the missing piece and put it back in place.

由 Mimi 完成的 2016年2月18日

Great! Thanks a lot for your clarification

由 J Lefo 完成的 2016年2月18日

No problem here to help.

If my answer is what you are looking for please mark it as answer accepted.

Thanks

由 Mimi 完成的 2016年2月18日

Last question though, do you know a nice tutorial explaining how to change the connector or how to repair the top bit? (Can't find any good one google...)

Many thanks

由 J Lefo 完成的 2016年2月18日

显示更多的3条评论

添加一条评论

Hi Mimi,

Thanks for your answer. You mean put some black tape on top of the connector to replace the missing part? — J Lefo
If you still have the part you need to try to put it in place like that the connections will merge. If you don't have the broken part just tape won't fix the problem you need to replace the connector or find the missing piece and put it back in place. — Mimi
No problem here to help.

If my answer is what you are looking for please mark it as answer accepted.

Thanks — Mimi
Last question though, do you know a nice tutorial explaining how to change the connector or how to repair the top bit? (Can't find any good one google...)

Many thanks — J Lefo

iPad 3 4G

Black bits on the connector pulled off during Digitizer replacement

1个答案

添加你的答案