声誉积分: 253
2
2
1
My Huawei g610 has restarting fault, Main screen appears only for few seconds and it again restarts. Checked softwares and hardwares technitions, they advise to change the mohterboard. is there any other solution. please help.
声誉积分: 11.2千
43
9
11
hello even what I had had the same problem but it was only a cover that had broken near the power button holding down the button
这个答案有帮助吗？
声誉积分: 103
2
step 1->change ur mobile firmware
http://consumer.huawei.com/pk/mobile-pho...
may be power button short check and proceed
这个答案有帮助吗？
how to change it while the mobile is keeping restarting ?
声誉积分: 13
1
I faced the same problem! But my phone was in warranty so i go to the huawei franchise and they said that it was the board problem and need to change the board! After changing the board, my phone works perfectly!
这个答案有帮助吗？
How much the board costs?
The board or to be more specific ,the chipset ,costs between 2000-4000 PKR(rupees). Buy a second-hand phone and it'll cost about the same.
声誉积分: 13
1
I tried it but nothing changed . It fails to factory reset and it doesn't pick the new firmware.
这个答案有帮助吗？
hello, have you tried to disassemble the phone and check the contacts of the button and the battery charging socket? Sometimes dirt can make jokes
Yeah tried it. :(
声誉积分: 13
1
1
Your phone should have to upgrade or downgrade firmware. Or you have to should check your battery.
这个答案有帮助吗？
I have the same problem with the logo and vibrate only loop... and when I flashed it in a huawei flash tool, it displays BROM ERROR 6126.. which is the reason I got here, usually I didn't encounter this error before when this phone was bricked for the first time.. but now it really is crazy and there's no link on the internet that this BROM error 6126 was solved.. a lot of people is getting crazy about this error and no one knows how to fix, so the best way is to change the motherBoard.
这个答案有帮助吗？
声誉积分: 1.3千
5
1
This is hardware problem, if you can enter in recovery mode, it will work after software update. If you can not enter in recovery, try reflow eMMC chip. most cases is wather damege.
这个答案有帮助吗？
got the same problem!
first i was using my googlechrome and suddenly it went auto restart
then everytime i open googlechrome it started to do auto restart
so i thought maybe my phone's memory is already full
so i tried to uninstall my other applications then restart my phone
after restarting my phone , all the applications that i uninstalled is still there
seriously uninstall the applications then its still there?
so i tried the factory reset.
i wipe all the datas and cache after that reboot system
still everything on my phones memory is still there
i even unchecked the auto restore backup yet nothings happened
how can i fix
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 3
过去 30 天： 3
总计 18,497
1条评论
huawei g610 not on . connect power supply power on .17to.19 in power buttn then 0 . charg conect only charg red light on
由 rizwan anjum 完成的