跳转到主内容

The Acer Iconia One 7 is a tablet released on April 2014. The Iconia One 7 is a compact package full of media fun. With a bigger-than-phablet display that is both clear and colorful, you get speedy response and hours of battery life to keep things going. We’ve also included our Kids Center platform with lots of cool kid’s stuff that parents can control.

44 个问题 查看全部

Why is Digitizer not working correctly after replacement?

After replacing my digitizer it is not responding correctly. It's like it's not calibrated properly. When I touch one place it appears somewhere else. I have to touch above or beside where I want to be. Is this a faulty digitizer or is there something else I can do? I tried cleaning the ribbon with ethanol but that didn't help.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

已选择的解决方案

Did you possibly miss align the screen or did you clean off all the old bonding tape . There is also the chance you doubled over some of the tape if you used the old tape again. Does the screen look like its sitting completely level in the frame or is there part of the screen sitting above the frame .

这个答案有帮助吗?

得分 2

1条评论:

I've not put any tape on yet. I was testing it before I stuck it down permanently. Cleaned all the old stuff off before hand. It looks to be sitting in properly and straight. I've checked and double checked everything I can think of.

完成的

添加一条评论
最有帮助的答案

Two possible issues.

1. The digitizer cable isnt seated properly or could be pinched.

2. You have a bad digitizer.

I'd take it apart and reseat everything. If it's still acting funky, I'd get another digitizer.

这个答案有帮助吗?

得分 2

1条评论:

Checked that. It has a bend in the ribbon but no splits or tears that I can see. Going to return it and try a different one.

完成的

添加一条评论

添加你的答案

Peter 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 9

总计 1,445