Dead spot on upper left corner

Question

iPad Mini 1st Generation

Apple's 2012 first-generation 7.9-inch iPad mini, with 16, 32, or 64 GB of storage and an A5 processor.

630 个问题查看全部

Henrik Andersen @henrikande52673

声誉积分: 23

1

发帖于: 2015年11月26日

更多选项

Dead spot on upper left corner

Hi guys,

I have been working on an iPad Mini which is giving me headache. I replaced the digitiser and experienced the screen going absolutely crazy when laid flat on the frame.

Got the solution for that by searching here - taping the copper parts on the new digitiser which solved the issue. But then I got a dead spot on the upper left corner instead, approx. 2x2 cm where the digitiser is unresponsive. Tried another digitiser but with the same result - a dead spot the same place.

When removing the digitiser from the frame and holding it up, it seems to work periodically.

I tend to think that there is a hardware error in the iPad but maybe I'm just missing something vital? Any suggestions/advice will be greatly appreciated ..

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

2个答案

已选择的解决方案

jessabethany @jessabethany

声誉积分: 30.6千

iPad Rehab--Microsoldering, Mail-in Repair, Data Recovery

25

71

41

发帖于: 2015年11月26日

更多选项

I would think this is almost certainly a parts or installation problem. If you are seeing the same problem on multiple screens from different suppliers, then it is an installation problem. There are a million installation problems you can have on the finicky iPad mini---I wrote a blog on my iPad Rehab website about the 44 individual installation errors that I learned on my own the hard way.

In your case, I would guess you are probably not bending the digi flex toward the LCD as it is in the original. It is tempting to allow the digi flex to adhere to the adhesive on glass---which will result in the flex folding back toward the frame and ultimately forming a crease---which can cause ghosting and dead spots.

The touch ic on the screen is the cause of dead spots. The digitizer/flex connector on the logic board is touch all or nothing.

good luck!

Jessa

这个答案有帮助吗？

是否

得分 0

1条评论:

Hi Jessa,

Thank you very much for the elaborate answer.

I considered this to be the problem as both the digitisers I tested have creases on the flex cable and probably have been pinched. But what puzzles me is that it is the exact same place there is a dead spot on both .. What are the odds for that?

由 Henrik Andersen 完成的 2015年11月27日

添加一条评论

Hi Jessa,

Thank you very much for the elaborate answer.

I considered this to be the problem as both the digitisers I tested have creases on the flex cable and probably have been pinched. But what puzzles me is that it is the exact same place there is a dead spot on both .. What are the odds for that? — Henrik Andersen