跳转到主内容

这款4.7英寸iPhone于2014年9月19日发布,是iPhone 6 Plus的缩小版。

5058 个问题 查看全部

Touch ID not working after lcd replacement

Hi, I recently had a friend come into our shop and I fixed his lcd on an iphone 6. I was very careful not to tear the home button flexes by using a heat gun to loosen the adhesive. After transferring the home button and replacing the lcd, he says the touch ID won't work and the phone will occasionally turn off (after playing music then locking the phone.) is there any way it could be I didn't snap the home button in properly, or did I most likely tear the flex? Please be the first of the two...

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0

评论:

I'd like to add that it was a whole screen replacement, not just the lcd

完成的

添加一条评论

1个回答

已选择的解决方案

Well, as far as the Touch ID goes. Just have him bring it back. If you were careful. It's probably that it just isn't securely fashioned down, in one of the two areas. Or, it could be that it just needs to be power cycled. If you try these two things, and the problem persists. Then I would guess damage to the ribbon cable, and Touch ID will probably never come back again. If it's turning off, independently, that's a whole other issue. I would try power cycling, or force restart, and see where you wind up from there

这个答案有帮助吗?

得分 2
添加一条评论

添加你的答案

Jim 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 109