跳转到主内容

Model M8413 or A1007 / 600, 700, 800, or 900 MHz G3 processor

36 个问题 查看全部

Do I need to replace the yellow foam on the Video BGA?

I am reinstalling my logic board after a reballing repair. I sent the board in with the yellow foam pad attached to the shield side of the BGA. It was returned without it. How important is that pad? Is it an insulator or heat conductor? the only thing that would come into contact with it would be the lower shield.

Thanks,

Randy

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 -1
添加一条评论

1个答案

已选择的解决方案

Foam pads are normally just isolation devices, intended to either act as a cushion or to separate parts that could make contact with each other. I'd replace it with something similar but I'm not sure it's totally necessary.

这个答案有帮助吗?

得分 1

1条评论:

Thanks Bob,

I had received an answer to this question on Apple Discussions from a member who said it was a thermal pad. That didn't seem right to me, but I replaced the yellow pad with a blue Apple thermal pad from another iBook an a couple of layers of thin thermal pads from Radio Shack.

From what you're saying, it sounds like I haven't done any damage. Maybe the iBook is even running cooler because of it. Who knows.

Thanks for your reply,

Randy

完成的

添加一条评论

添加你的答案

randy3833 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 13

总计 1,159