I replaced my screen and the click wheel does not respond.

Question

iPod Nano 1st Generation

Model A1137 / 1, 2, or 4 GB capacity / black or white plastic front

68 个问题查看全部

Dan @dan18420

声誉积分: 1

1

发帖于: 2010年7月24日

更多选项

I replaced my screen and the click wheel does not respond.

I just replaced the display screen, while following details instructions. However, I found the connecting ribbons for both the display screen and the click wheel extremely difficult to reinsert.

It now seems the display screen is working well (connecting ribbon inserted good), but now the click wheel does not respond.

I dissasembled and attempted to reinsert the connecting ribbon for the click wheel once more, and is still is not responding.

Any suggestions?

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 -1

添加一条评论

1个答案

markus weiher @markusweiher 声誉积分: 35.1千 140 71 53 · Answer 1 · 2010-07-24T15:54:17-07:00

最有帮助的答案

markus weiher @markusweiher

声誉积分: 35.1千

140

71

53

发帖于: 2010年7月24日

更多选项

i would check the hold switch first!

if that wont work. try to reset the ipod - press and hold the menu and the select button (at the same time) until the ipod restarts - this should take aroud 10 seconds.

这个答案有帮助吗？

是否

得分 1

添加一条评论

iPod Nano 1st Generation

I replaced my screen and the click wheel does not respond.

1个答案

添加你的答案