声誉积分: 13
1
声誉积分: 37
3
Using a plastic spudger or pry tool, lift up the side panel near the pairing button. You might have to massage the button a bit as you do this, but it should re-align the plastic nib to the actual button inside the speaker.
这个答案有帮助吗？
I initially thought I had to scrap the speaker. Thanks a lot for the fix! Worked to perfection...
Ivan, I know that the big jambox can be put into pairing mode by pressing a combination of buttons, do you know what that combo is?
Unfortunately, I don't know if there is one. Sorry. The fix did work. The speaker is now dead because the battery won't recharge anymore... :(
过去 24 小时： 0
过去 7 天： 1
过去 30 天： 20
总计 4,614
1条评论
The rubber/plastic part of the pairing button is probably just misaligned from the actual button inside. If you pry up the side panel a little near the button, it will usually re-seat itself.
由 geoff 完成的