第二代HTC One被称为HTC One(M8),它具有双闪存和新的Sense 6 UI,并于2014年3月25日发布。

217 个问题 查看全部

Extremely Dark Screen on HTC One m8

I bought a screen replacement for htc one m8 and received it

yesterday. I also bought a new rear housing. I disassembled the

phone with no problem. After that I tried to reassemble the phone.

When I did that the phone was perfectly fine the touch screen was

fully functioning. However, the selfie camera was green and the front facing camera was black so i disassembled the phone reconnected the cameras. (Turns out that I didn't take off the film that was covering the camera). After reassemble The screen turned on and then went completely dark. It's on but, you can't see anything with out bright light. Touch function also work. Disassembled again and reassemble thinking that maybe one of my cables was loose. The screen of the phone is still dark. How do I fix this problem?

回答此问题 我也有这个问题

这是一个好问题吗?

按维修分数 3

评论:

This question was migrated from http://meta.ifixit.com/Answers.

添加一条评论
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12

1个答案

最有帮助的答案

Case is your LCD back light not working

Fault can be occur from below items

1) Back light faulty : change the new LCD and check

2) Back light drivers not working

  • Check the FPCs connect properly
  • Re solder FPC connectors and check
  • Do the below path modification and check

http://www.u2ugsm.com/blog/wp-content/up...

This path damaged due to short circuit back light

reason to burn paths

  • Bad fixing LCD FPC
  • Bad quality LCD

这个答案有帮助吗?

按维修分数 1

评论:

Reconnected it to my old screen and it was still dark. Therefore, I don't think it is option 1. I might still need to buy new lcd just in case. I don't really feel that comfortable doing option 2. Thanks for the suggestion though.

Also I held it under a bright light for a little bit and the screen started to work again but, once it went into sleep mode it stopped.

Quenton McDaniel,

Check below steps to boot in safe mode, according to your sounds i guess light sensor also part of fault

how to boot on Safe Mode:

* Hold the Power button until you can access the options

* Hold Power off until Reboot to safe mode appears

* Tap Restart to select

* You should see “Safe mode” at the bottom left of the screen

添加一条评论

添加你的答案

Quenton McDaniel 将永远感激不已
浏览统计数据:

过去的24小时: 2

过去的7天: 11

过去的30天: 37

总计 4,013