跳转到主内容

苹果 iPhone 5s 于2013年9月10日公布。该设备的维修与以前的型号相似,需要螺丝刀和撬棒。可使用GSM或CDMA / 16、32或64 GB。颜色有银色、金色和太空灰。

3530 个问题 查看全部

iPhone 5S shows low battery black screen even when it's not connected.

I am repairing friends phone. Since I don't know the history of it and it was bought second hand I can't say if it was water damaged or not. Phone itself was roughly beaten and display changed. It was working ok and charging awhile then one moment stopped receiving charge.

After I have transplanted the motherboard and home button to another housing (being almost mint but with dead motherboard) I was able to charge the phone — after sitting on low battery screen for half an hour it booted.

Then it again stopped taking charge in few days. After some troubleshooting we discovered that applying pressure to lower right corner of the screen start the charging and decided it was due too loose connector.

I didn't repaired it instantly and in a while friend reported that method of applying pressure no longer works.

Now phone is in the state that it is showing Low Battery Charging black screen even when it is not connected at all. This one

Block Image

And lighting connector icon is flickering slightly about every second.

I can't say if it is really charging or not. It sure is not booting. Hard reset doesn't help. I can't put it in DFU.It is not showing in System Profile USB section. Disconnecting battery doesn't help.

I have multimeter if that is needed. Anyone has any ideas how to troubleshoot it further?

P.S. My girlfriend is now using iPhone 3GS I was able to jumpstart after it was seemingly dead after fake charger. I wonder if this problem is of the same kind.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

3个答案

已选择的解决方案

Gonna go ahead and guess U2 IC, at this point

这个答案有帮助吗?

得分 2

1条评论:

Might be yes. Could I please ask you to come and answer to my other question if you remember about 3GS circuitry?

It is here How to check how good battery is with only phone and multimeter?

完成的

添加一条评论

May be the problem is the lightning connector, shorted somewhere or oxided yet. Look inside it, try to clean with trieline, or also you cant try to brush slowly it. Let me know

这个答案有帮助吗?

得分 0

1条评论:

That is for sure not the case. I have tried disconnecting dock connector from logic board and it still show charging screen.

完成的

添加一条评论

It was one of the chips as tech in local soldering shop told me. It was pretty straightforward and pretty inexpensive repair by specialist.)

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

iskra 将永远感激不已
浏览统计数据:

过去 24 小时: 2

过去 7 天: 4

过去 30 天: 7

总计 2,871