The 4Sight 9 is an Android based tablet released on March 15th, 2013. Repair is similar to other tablets in that you need a screwdriver and pry tools, you will also need a solder gun (and solder.) Model number is 4SPA0910C

5 个问题 查看全部

Why won't my tablet hold a charge?

My tablet will turn on just fine, but I've been having problems with it holding a charge for longer than a few minutes. What can I do to keep it charged longer?

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 2
添加一条评论
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3个回答

已选择的解决方案

Determine whether or not you are charging it with a USB adapter, or a wall adapter. Often times these tablets will exude more power than a USB is able to give, so when constantly charged that way, it can become less and less likely to hold. Instead, always plug your tablet into the wall, as it can give equal amounts of power as the 4 Sight tablet uses. Another likely cause is that the battery was not connected properly. One should take their battery out and see if there is any debris that this blocking the connection to the device. If this is not the case, a connector may have become bent or have suffered a corrosion, and can be unbent and replaced, using ones fingers, as to avoid the possibility of breakage. Wait several seconds, then turn on the tablet.

这个答案有帮助吗?

按维修分数 0

评论:

What is the difference between a usb adapter and a wall adapter.

添加一条评论

Determine whether or not you are charging it with a USB adapter, or a wall adapter. Often times these tablets will exude more power than a USB is able to give, so when constantly charged that way, it can become less and less likely to hold. Instead, always plug your tablet into the wall, as it can give equal amounts of power as the 4 Sight tablet uses. Another likely cause is that the battery was not connected properly. One should take their battery out and see if there is any debris that this blocking the connection to the device. If this is not the case, a connector may have become bent or have suffered a corrosion, and can be unbent and replaced, using ones fingers, as to avoid the possibility of breakage. Wait several seconds, then turn on the tablet.

这个答案有帮助吗?

按维修分数 0
添加一条评论

For additional information, follow the steps on the troubleshooting page.

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

Hali Ramirez 将永远感激不已
浏览统计数据:

过去的24小时: 9

过去的7天: 38

过去的30天: 175

总计 4,550