声誉积分: 85
2
2
So a few days ago I dropped my phone and the screen popped out of the iphone mainframe, I popped it back in but now the screen wont work and I can press down the phone like its still not in properly. Siri still works and I can hear things but when I tried to hard boot it, it stopped responding completely. What do I do?
声誉积分: 1.5千
22
9
4
One solution to your problem is to make sure that the connection between the display module and the logic board of the phone is intact. Dropping the phone may have dislodged the connection, with continued use causing the internal cable to disconnect. Follow the iFixit iPhone 5c Display Assembly Repair Guide for help finding the connectors for the Front Panel.
这个答案有帮助吗？
I have the same problem but when I popped my screen back in it had a black splodge in the screen display I don't know what it is
Means the screen LCD display is damaged. Since the LCD and digitizer are fused together you will need a iPhone 5c Front Panel Replacement.
声誉积分: 16.1千
39
92
13
well same thing had happened here but what i did was hold the home button while holding the power off button and it worked and i was like freaking out before but it worked so i hope this help ^.^
这个答案有帮助吗？
well what i did to fix it was hold the home an d power off button at the same time and well ah it was fixed hope it helps bye. ^>^
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 3
过去 30 天： 6
总计 13,510
did you solve this bc i have the same issue and i was wondering what did you do?
由 hchinchillajr 完成的
Replacing the screen is what you do if you already tried reseating the front panel connectors. The LCD cable is fragile on the 5c and can easily rip on drop.
由 Ben 完成的