Why is the drill making strange clicking sounds when in use?
When I use the drill it is making clicking sounds.
225266
声誉积分: 107
5
1
2个答案
已选择的解决方案
声誉积分: 107
5
1
There are different settings on the drill for drilling holes and driving screws. If you are trying to drive a screw and the drill is in a lower speed setting, which is used when drilling holes,then a clicking sound could occur.
这个答案有帮助吗？
得分
3
I think what the 1st guy meant was that the drill/driver has a range of torque settings for driving screws, adjusted by turning the collar behind the chuck. This is used to prevent stripping or breaking the screw. When the torque is exceeded, the driver slips and makes a loud clicking noise.
For drilling it is normally set to the highest setting.
What about that click that some drills make when you stop “drilling”. My drills don’t do this, but it seems like newer high dollar ones (esp Milwaukee) do this.
声誉积分: 13
2
I think what the 1st guy meant was that the drill/driver has a range of torque settings for driving screws, adjusted by turning the collar behind the chuck. This is used to prevent stripping or breaking the screw. When the torque is exceeded, the driver slips and makes a loud clicking noise.
For drilling it is normally set to the highest setting.
这个答案有帮助吗？
得分
1
