Why doesn't my Phillips Picopix display the green light anymore?

Question

Projector

Repair and disassembly guides for projectors.

20 个问题查看全部 | 117配件购买

pouletfr @pouletfr

声誉积分: 1

1

发帖于: 2015年2月23日

更多选项

Why doesn't my Phillips Picopix display the green light anymore?

Hi. I bought this very compact pocket projector some months ago, and it worked fine. But one day I turned it on and the image was all yellow-ish. I believe those projectors use three light colors: red, green and blue, so I looked at the image carefully, and indeed noticed that everything that should have been green was a dark, undefined color.

So I deduced that the part of this projector that actually emits the green light (a LED, I presume?) was out of order, and of course, I'd like to fix/replace that. But I have no idea how to!

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

4条评论

I have the same problem. Have you found a solution?

由 abouras 完成的 2015年8月23日

hello, i have a PPX3614 and it dosn't turn on at all. what can i do?

由 silviu_zoltan 完成的 2020年3月31日

Not yet, sadly... I'm afraid the device isn't meant to be repaired.

由 pouletfr 完成的 2015年8月23日

When I saw th eprice for repair, I destroyed and recycled

由 Franck PAVAN 完成的 2020年9月13日

添加一条评论

1个答案

已选择的解决方案

abouras @abouras

声誉积分: 67

2

1

发帖于: 2015年8月23日

更多选项

I have good news. I open it and I pressed all the cable adapters so that they can make a better contact. The bad news is that one cable adapter, the one close to the lens - leds module, was a little bit burned. I think it was the cable adapter that has many green cables.

My Picopix 3610 now works fine, but I don't know for how long. :-)

这个答案有帮助吗？

是否

得分 3

6条评论:

Please, can you indicate how you opened the Picopix as I don't see any screw and I don't want to crush it?

由 Franck PAVAN 完成的 2016年8月22日

There are two screws on the bottom hidden under rubber grommets. After that, pry the top off with a plastic card.

由 P Sarkozy 完成的 2017年3月9日

Thanks this fixed my picopix as well.

由 Daniele Guido 完成的 2017年3月19日

Thanks : it works as well. Same part was a little burnt and I just unplug then reply it.

由 nathalie clot 完成的 2017年7月9日

After some time, it stopped working again (the screen was yellow-ish again), so I re-opened it and I noticed that the cable adapter was burned a lot this time. I replaced the cables with new ones, but I soldered them directly on the board, without using the connector. Now it works fine, for quite a long time since then.

由 abouras 完成的 2017年7月24日

显示更多的1条评论

添加一条评论

hello, i have a PPX3614 and it dosn't turn on at all. what can i do? — silviu_zoltan
Not yet, sadly... I'm afraid the device isn't meant to be repaired. — pouletfr
Please, can you indicate how you opened the Picopix as I don't see any screw and I don't want to crush it? — Franck PAVAN
There are two screws on the bottom hidden under rubber grommets. After that, pry the top off with a plastic card. — P Sarkozy
Thanks : it works as well. Same part was a little burnt and I just unplug then reply it. — nathalie clot
After some time, it stopped working again (the screen was yellow-ish again), so I re-opened it and I noticed that the cable adapter was burned a lot this time. I replaced the cables with new ones, but I soldered them directly on the board, without using the connector. Now it works fine, for quite a long time since then. — abouras

Projector

Why doesn't my Phillips Picopix display the green light anymore?

1个答案

添加你的答案