Broke Flat cable Gimbal H3-3D

Question

DJI Phantom 2

The DJI Phantom 2 is a quadcopter with an optional brushless camera gimbal produced by DJI. It has a 25-minute maximum flight time and an automatic return-to-home and landing feature but does not include a camera. It was released in December 2013.

13 个问题查看全部

Bic @bic64649

声誉积分: 13

1

发帖于: 2015年1月7日

更多选项

Broke Flat cable Gimbal H3-3D

Hey, What's up?

I Broke my ribbon cable from zenmuse H3-3d, not the video usb cable.

Does anybody know how to fix it?

Where can I find it to buy?

Thanks

Solved!

Hey guys. Sorry my english, but i hope help anyone with this question.

I took my broken cable and search one people that try to welding.

3 eletronic story said to me that this rainbbon cable is impossible to welding. But i find one guy, he make the welding and fixed my broken gimbal.

Here is the picture:

I dont fly with the phantom 2 yet, but i turn it on and move the gimbal, and appears to be working.

God Bless guys!

Later i will ask to my other friend to fix my english imperfections!

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 1

3条评论

I have the same problem, did you found any solution?

由 luccasg 完成的 2015年1月20日

I have the same problem, did you found any solution?

由 manuelmedrano 完成的 2015年10月5日

http://www.aliexpress.com/item/Free-DHL-...

由 manuelmedrano 完成的 2015年10月5日

添加一条评论

5个答案

David Hoyt @dhoyt 声誉积分: 4千 53 25 13 · Answer 1 · 2015-01-11T11:22:55-07:00

最有帮助的答案

David Hoyt @dhoyt

声誉积分: 4千

53

25

13

发帖于: 2015年1月11日

更多选项

Assuming you're referring to the G8 cable, I found one here by searching 'DJI G8 Cable' on Google Shopping: Link

这个答案有帮助吗？

是否

得分 1

1条评论:

Thank you so much for your answer. Unfortunately this is not the cable I broke.

It's like this cable > http://nzhelmetcams.co.nz/375-thickbox_d...

But the Zenmuse one, this web link is for the Vision, and I have the Zenmuse H3-3D.

Thanks again

由 Bic 完成的 2015年1月12日

添加一条评论

Bic @bic64649 声誉积分: 13 1 · Answer 2 · 2015-02-03T14:03:04-07:00

Bic @bic64649

声誉积分: 13

1

发帖于: 2015年2月3日

更多选项

please, read the solution on my post.

Bless

这个答案有帮助吗？

是否

得分 0

添加一条评论

manuelmedrano @manuelmedrano 声誉积分: 1 · Answer 3 · 2015-10-05T23:00:16-07:00

manuelmedrano @manuelmedrano

声誉积分: 1

发帖于: 2015年10月5日

更多选项

http://www.aliexpress.com/item/Free-DHL-...

这个答案有帮助吗？

是否

得分 0

添加一条评论

Chris Riddle @chrisriddle 声誉积分: 1 1 1 · Answer 4 · 2015-10-05T23:06:18-07:00

Chris Riddle @chrisriddle

声誉积分: 1

1

发帖于: 2015年10月5日

更多选项

Do you know solution of it. Help me out for this problem.

这个答案有帮助吗？

是否

得分 0

添加一条评论

gmjanh @gmjanh 声誉积分: 1 · Answer 5 · 2016-11-10T05:45:20-07:00

Yes, it is possible to solder the Flex Ribbon Cable for Zenmuse H3-3D. I have done so on five different spots on mine.

Tools:

-------

Magnifier or even better, some glasses with a lot of +

Scalpel with very thin tip

Thin soldering iron tip.

Thin solder...THIN

How to:

----------

You may be forced to first take the gimbal apart. Check howto with YouTube first.

Plug in the iron. If possible, start with as low temperature as possible. Try on the solder first.

Locate the broken spot.

Carefully scratch approx 1.5 mm of both sides. Carefully! until the copper is not covered .

Put a tiny amounth of solder on both copper ends, put some very small amounth of solder on the clean soldering iron tip. CLEAN...ok? Then carefully drag the iron over the broken spot. Don't move anything for some seconds.

Voila! Connected!

If you are unlucky you may have to do this on all leads and maybe on several broken spots. This was the case for me.

I know it works because my P2 has been up n flying a lot since the repair.

DJI Phantom 2

Broke Flat cable Gimbal H3-3D

Update

5个答案

添加你的答案