声誉积分: 13
2
I ordered i replacement lcd screen on line threw Ebay for my nikon d5100 and when i opened up the screen the back of it is just a flat piece of metal and the one on the camera has a circuit board on it with 3 wires and a few ribbons . Did i order the wrong screen or am i suppose to pull that circit board off the original and somehow affix it to the new one.
My camera when opened looks just like the one in your video on this site
声誉积分: 13
2
I found the answer to my own question .The circuit board is glued to the back of the lcd screen so i used a vary thin vary sharp knife to slide between the screen and the circuit board .They came apart nicely but i ended up breaking one of the connectors for the ribbon tape on the circuit board . I ended up in the end buying a complete unit for the back for a vary reasonable $40.00 .If you go this root you will need to spit the camera case in half but there is no soldering involved . I wood recommend buying a high end #3 Philips screw driver
because i used a cheep one and stripped 2 or more screws that i had to drill
out. Also in the step buy step guide in the solutions section for spitting the case he forgot the 3 screws around the eye piece . My camera is now working well.
这个答案有帮助吗？
sorry the phillips screw driver is a #00 not a #3
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 131
1条评论
Same question here. Anybody have an answer?
由 Phil 完成的