修复你的物品 社区 商店

The third generation of the Apple iPad, released on March 16, 2012. Full 4G and Wi-Fi model repair guides. Repairs require heat and careful prying. Model numbers: A1416, A1430, and A1403.

310 个问题 查看全部

更多选项

Cellular 3g antenna torn

Hi,

I have replaced ipad 3 digitizer successfully, But while removing the cracked one, Top right side piece next to the front camera got torn. without pasting the digitizer i checked following options and all are working.

3g, wifi, Bluetooth,mic sounds, front and rear camera, volume, mute, power, home buttons are fine.

What should i do? do i have to replace the right side part or just leave it as it is and close it back?

I have attached a picture for your reference,

Kindly reply ASAP as I'm wait your respond top proceed to next step.

Thanks & regards

Mevan FErnando

i tired uploading 2 images but it says unknown error

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 1
1条评论

This question was migrated from http://meta.ifixit.com/Answers.

由完成的

添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Tearing an antenna usually degrades its RF performance, your cellular reception will still work but with degraded performance, like maybe slower speed, no service in weak coverage areas, higher power consumption.

The right antenna also serves as the proximity sensor, if it is torn, the cellular module will not properly regulate RF transmit power when your hand is touching the area. So the transmit power may be over safety limit(in my opinion not a problem, the whole idea of cellular signal causes cancer is bullsh1t) or constantly latched to low power setting due to the sensor falsely triggering. This can cause performance issues.

So if you think it is a problem, replace it.

这个答案有帮助吗？

是 否
得分 2
添加一条评论

添加你的答案

Mevan Fernando 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 21

总计 129