跳转到主内容

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

233 个问题 查看全部

Test the logic board without LCD?

I have a first Gen ipad mini that got run over by a couple cars after falling out of an open trunk.

The chassis , LCD and Digitizer were wrecked the insides (logic board, battery and cables look pretty much intact. My question is whether or not I can fire it up in iTunes without an LCD or digitizer attached?

I'm concerned I might blow the backlight IC but am not sure if there is a work around with attaching a new LCD.

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论

Android 维修工具包

A new screen or battery is one kit away.

现在开始购物

Android 维修工具包

A new screen or battery is one kit away.

现在开始购物

1个答案

已选择的解决方案

I can't see it doing any harm plugging it into iTunes to see if it reconises it..

No point spending a fortune on parts for it to be bricked in the first place

这个答案有帮助吗?

按维修分数 0

评论:

Ok. Just I'm clear. What causes the backlight ic to burn out? Is it powering the logic board without the LCD connected or connecting / disconnecting the LCD while the board is powered up?

The 2 coils, the 2 diodes, and the 2 fuses check the fuses first, then the diodes then the coils, rarely ever do the coils go bad, the fuses are usually the main cause of backlight issues, if they go 50% of the time 1 or 2 of the diodes will go also ... you may already know fuses have continuity, diodes only have current carried one way

Also if it was a backlight issue you could turn off the lights and shine a flashlight at the screen and see the image or put the LCD under a bright light

添加一条评论

添加你的答案

Brian 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 6

总计 687