Lcd half dead after digitizer replacement, can someone help me?

Question

iPad Mini Wi-Fi

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

221 个问题查看全部

csk34 @csk34

声誉积分: 1

发帖于: 2014年6月21日

更多选项

Lcd half dead after digitizer replacement, can someone help me?

Hello everybody!

I just tried to fix my iPad mini after my father broke the digitizer.

So....where do I start??

First time I do this kind of operation, purchased all the items from the iFixit store in EU besides the digitizer which was not available.
Removed the broken digitizer (that was messy...glass shattered everywhere!)
Removed the lcd and shield plate
Disconnected broken digitizer, lcd and battery
Cleaned up everything
Connected the new digitizer, lcd and battery
Tested the iPad to see if everything was working
PROBLEM!

There is no backlight but you can see the icons on the lcd, the problem is that the left half of the screen is dead!

I tried to disconnect and re-connect the lcd again but nothing changed, have I damaged something while I was removing the lcd??

Please find attached some photos of the lcd

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

2个答案

已选择的解决方案

jessabethany @jessabethany

声誉积分: 30.6千

iPad Rehab--Microsoldering, Mail-in Repair, Data Recovery

25

71

41

发帖于: 2014年6月21日

更多选项

You have two common problems.

1.) You removed the LCD connection before removing the battery. This will blow the highly sensitive iPad mini backlight fuse. It will have to be replaced. I highly recommend sending it out for a simple inexpensive fuse replacement rather than reading up on the all the ways to jump the fuse, it is in an area surrounded by critical components---way too easy to do irreversible damage

2.) You damaged the LCD itself during removal. This is very common with the thin LCD on the mini, and can often occur just from flexing the LCD during removal, or from failure to cut through the bottom tape--too much pressure on the LCD.

You will need a new LCD and a fuse replacement to solve.

jessa

这个答案有帮助吗？

是否

得分 2

1条评论:

For the LCD you were right, I damaged it while I was removing it.

For the backlight everything fixed by itself, the following day the backlight was working ok, even with the damaged LCD.

Today I installed a new LCD and now it's everything is good.

Thanks for the support.

Cheers

由 csk34 完成的 2014年6月25日

添加一条评论

For the LCD you were right, I damaged it while I was removing it.

For the backlight everything fixed by itself, the following day the backlight was working ok, even with the damaged LCD.

Today I installed a new LCD and now it's everything is good.

Thanks for the support.

Cheers — csk34