跳转到主内容

Compact digital camera with built-in flash with 10.0 Megapixel, 10x Optical Zoom and Image Stabilizer System. Disassembling requires the use of certain equipment.

19 个问题 查看全部

My camera won't turn on, how do I fix it?

I dropped my camera recently and I've tried various times to turn it on but it refuses to do so.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 33
22条评论

I have a er 99 camera wont turn on

完成的

I have the a2200 canon and my battery is on full charge but it won’t come on

完成的

I have Samsung PL 101 it's fully charged but it won't open

完成的

My dsc-w5 camera only turns on to see pictures. Won't to on to take pictures.

完成的

I dropped my Canon ELPH 160 in the water and snow what to do about it

完成的

显示更多的17条评论

添加一条评论

11个答案

最有帮助的答案

First check the battery compartment door. There is a micro switch that turns the camera off when you open it. If the battery cover does not press down on the switch the camera won't go on. Make sure that the battery compartment door covers the batteries so that the micro switch senses that the cover is closed.

这个答案有帮助吗?

得分 14

8条评论:

Please help me in locating sensor in SX120 IS . I tried to find but no luck..

完成的

Holding the camera upside down with the battery door open and the SD chip closest to you, the micro-switch is white. it is to the left of the SD card, immediately to the right of the black plastic protrusions which might act as a catch for the latching mechanism. We have 2 of these cameras. The one that is working has the white micro-switch which moves down when you push on it. The broken camera seems to be missing this white micro-switch, and it will not turn on.

完成的

May please u show me white-micro switch on a picture. I think mine is the same problem.

完成的

Thank you, thank you. This was the first site I tried and yours the first answer. My micro switch had become jammed. One poke with a paper clip and, voila, fixed. Yea

完成的

Thank you , very much so how do i maintain the micro switch so that it doesn't go off otherwise i think it will go off again though i used the same trick as viola a paper clip and it worked so i am still worried it wont go on again

完成的

显示更多的3条评论

添加一条评论

Holding the camera upside down with the battery door open and the SD chip closest to you, the micro-switch is white. it is to the left of the SD card, immediately to the right of the black plastic protrusions which might act as a catch for the latching mechanism. We have 2 of these cameras. The one that is working has the white micro-switch which moves down when you push on it. The broken camera seems to be missing this white micro-switch, and it will not turn on.

just now by Robyn Budenstein

这个答案有帮助吗?

得分 5

1条评论:

Thank you so much for your detailed description. Would you mind posting a picture so that I can see the switch and it's placement in the camera please?

完成的

添加一条评论

I found a solution to this question. First make sure the battery's are charged. Second remove the SD card and replace it with a new one. Then replace the lens with another one(you don't have to). Now it should work

THANKS!

这个答案有帮助吗?

得分 2
添加一条评论

I had this problem all I you need to do check the bottem of the cam make sure battery is pushed in. But I'm referring to a safari hd action camera

这个答案有帮助吗?

得分 1
添加一条评论

I was missing the white switch, so I used a small piece of aluminum foil and packed it in nicely. You can see how the switch should look here around 10:12 into the video. Hope it helps. Peace.

这个答案有帮助吗?

得分 0
添加一条评论

A few different issues can be cause for this problem in a Canon camera. First, make sure that the battery is fully charged and inserted properly. Even if you've had the battery inserted in a charger, it's possible that the battery wasn't inserted properly or the charger was not plugged into an outlet properly, meaning the battery did not charge. Make sure the metal terminals on the battery are clean or there is no carbon on them. You can use a dry cloth to remove any grime from the contact points. Finally, if the battery compartment door is not securely closed, the camera will not turn on.

If it doesn’t work then go to the authorised service center.

这个答案有帮助吗?

得分 0
添加一条评论

Check the battery to see if it’s damaged or not.

If you need to send it to a pro, remember to take out the SD card in advance.

这个答案有帮助吗?

得分 0
添加一条评论

I have a canon powershot ELPH 180. After 2 years it started acting strangely. First, it wouldn't take movies unless I held in the movie button. Then it started scrolling through the picture roll when I started it up even though I did not have it set to do that. Then it would start up once, but then after I shut it down it wouldn't start again unless I removed and re-insterted the battery. I bought a new battery which reduced the frequency of the issues, but then it started not turning on again. What finally solved it was that I CRC'd every connection.

Get a can of CRC or similar fast evaporating electronics cleaner online or in the back of your local Walmart with the automotive miracle additives. Turn the camera upside down and spray the CRC into the crack around the On/Off switch and photo actuator buttons. Let it drain and dry for 15 minutes. Then open the battery compartment and remove the SD card and battery. Put the little CRC hose in both and spray a bit while holding it righ side up so those cavities drain. Then spray the metal parts around the battery door, and spray the terminals on the battery and SD card.

Let everything dry for 15 minutes and then put everything back in and start it up.

It was funny, because even after cleaning the camera connections I still had problems with the old battery. But after I CRC'd the connections on the old battery even that worked fine. So apparently these Powershots are very sensitive to even the smallest amount of corrosion on any of the connectors.

Now mine works fine again.

这个答案有帮助吗?

得分 0
添加一条评论

I know with my SX200is there is a very small microswitch underneath the battery cover. If the cover is not closed correctly, the cover is damaged or the microswitch prong is damaged, this prevents the camera being turned on.

In this sort of situation, replacement of the cover and or microswitch would be the solution. Or repairing the cover. Also I found bodging a way to keep the switch pressed in, did it for me. But be warned that you could accidentally switch it on with out the cover closed and could damage the cover more during use.

Block Image

这个答案有帮助吗?

得分 0
添加一条评论

Camera is not working camera is staaak

这个答案有帮助吗?

得分 0
添加一条评论

help me! I followed the steps to replace the lcd screen. The new screen is bright and beautiful. However when I close the case, inserting the battery into my canon does not respond. When I use an external charger attached to the IN port, the device receives commands and lights up the screen to browse images normally

Block Image

Block Image

Block Image

Block Image

Block Image

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Maria 将永远感激不已
浏览统计数据:

过去 24 小时: 13

过去 7 天: 99

过去 30 天: 407

总计 90,956