trouble reassembling iPhone 4s

Question

iPhone 4S

iPhone4S是第五代iPhone。网络制式为GSM/CDMA ，存储容量有8GB、16GB、32GB、64GB可选，机身颜色有黑色、白色可选。维修iPhone4S是容易的，需要耐心，用到的工具有螺丝刀、撬棒等。

2193 个问题查看全部

soya @soya90873

声誉积分: 57

3

2

发帖于: 2014年4月12日

更多选项

trouble reassembling iPhone 4s

i have a few problems so please read everything

i didnt know where to put this part i outlined in a redcircle on the flex cable so just pushed it in under the motherboard and over the speaker, i didnt see anywhere for it to connect too so i cant imagine it doing anything

http://s14.postimg.org/49skwid4h/For_iph...

i also have this little black peice of plastic left over, no idea what to do with it... its not the grounding clip

this is the best photo i could take of it im afraid

http://s29.postimg.org/xumwkdi4n/webcam_...

after rebuilding the phone the screen nolonger works, could the problems above have anything to do with it

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 -1

1条评论

last question

is it safe for me to dissasemble

the problem is i know the iphone is turned on, ive no idea how much power is left since the screen dont work

is it safe to unscrew the battery

由 soya 完成的 2014年4月13日

添加一条评论

2个答案

已选择的解决方案

con @con82159

声誉积分: 37.6千

IRepair iphones

22

51

42

发帖于: 2014年4月12日

更多选项

The sensor folds over the ear speaker and you should see the imprint of were it's supose to go. The little clip holds it in place which is why it springs up and looks out off place

这个答案有帮助吗？

是否

得分 2

2条评论:

Yes it should be just use a plastic open pry tool when removing battery not a metal object this will cause a short

由 con 完成的 2014年4月13日

in the past i replaced the power button flex cable which didnt work... later on i took my phone apart because i forgot to put the clip on the sensor we already discussed, since that moment the power button started working... i have no idea if these things are connected? for some unknown reason my power button nolonger works again could the sensor have anything to do with it because i still dont feel like i installed it properly it always springs up if it wasnt for the logic board holding it down. the clip doesnt do much. i hate to have to buy another ribbon so soon i know for sure i didnt damage it and its connected properly, i tried reinstalling ios etc

由 soya 完成的 2014年5月1日

添加一条评论

last question

is it safe for me to dissasemble

the problem is i know the iphone is turned on, ive no idea how much power is left since the screen dont work

is it safe to unscrew the battery — soya
Yes it should be just use a plastic open pry tool when removing battery not a metal object this will cause a short — con
in the past i replaced the power button flex cable which didnt work... later on i took my phone apart because i forgot to put the clip on the sensor we already discussed, since that moment the power button started working... i have no idea if these things are connected? for some unknown reason my power button nolonger works again could the sensor have anything to do with it because i still dont feel like i installed it properly it always springs up if it wasnt for the logic board holding it down. the clip doesnt do much. i hate to have to buy another ribbon so soon i know for sure i didnt damage it and its connected properly, i tried reinstalling ios etc — soya

Beau @beau70389 声誉积分: 73 2 1 1 · Answer 1 · 2014-04-12T07:09:39-07:00

Beau @beau70389

声誉积分: 73

2

1

发帖于: 2014年4月12日

更多选项

That is the light proximity sensor. The other piece is the clip that holds the sensor in place. You need to make sure the sensor is pushed in all the way and then lock the clip into place. This should not have effected your LCD from not turning on at all. Check your connections after you have properly put the sensor back into place.

这个答案有帮助吗？

是否

得分 0

1条评论:

ok thanks,

im not intirely sure where im suppose to be pushing this light sensor into place

i cant seem to find any pictures or instructional videos which show me this detail

由 soya 完成的 2014年4月12日

添加一条评论

iPhone 4S

trouble reassembling iPhone 4s

2个答案

添加你的答案